Renesas RZ/A1H Series, Руководство пользователя

Страница: 19 / 34

RSK+RZA1H 3. Tutorial Project Workspace
R20UT2845EG0200
Rev.
2.00
Page 19 of 34

In the ‘Debugger’ tab, under ‘Run
control’, ensure that ‘Debug from symbol
main’ is selected. Select the ‘Run target
initialization debugger script (.ds/ py)’ tick
box and click ‘Workspace’.

In the ‘Open’ dialog, browse to ‘Tutorial -
> Scripts ->init_RAM_RZ-A1H.ds’ and
click OK. In the ‘Debugger’ tab, click
‘Apply’ to save the changes.

Connect the SEGGER JLink-Lite
debugger to a spare USB port on the PC
and connect the ribbon cable to CN14 on
the RSK+RZA1H.

Ensure the PWR_SEL jumper is set to
match the power supply. See the
RSK+RZA1H User’s manual to locate
the PWR_SEL jumper.

Connect a PSU to the RSK+RZA1H
PWR connector and apply power.

Click ‘Debug’ to start the new debug
session.

Before downloading the code a dialog
box will appear asking if you would like
to switch to the ‘DS-5 Debug
perspective’. If you agree click
‘Remember my decision’ to prevent this
dialog box from appearing in future, then
click ‘Yes’.

A dilaog may appear indicating that the
J-Link firmware needs to be updated.
Click ‘Yes’ to update the J-Link firmware.

DS-5 will load the new perspective,
which is optimised for debugging.

To change back to the default ‘C/C++’
perspective, from the menu bar select
Window > Open Perspective > Other
Mar 21, 2014