Renesas RTE7702012EAB00000J Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 53

Renesas RTE7702012EAB00000J Скачать руководство пользователя страница 3

Preface

The emulation adapter is an emulation board which is designed for use with RH850 family MCUs from Renesas
Electronics Corporation.

All components that come with the emulation adapter are listed under “1.1 Package Components”. If you have any
questions about the emulation adapter, contact your local distributor.

This user’s manual is mainly to describe the specifications of the emulation adapter. For the specifications of the
exchange adapters, refer to appendix A, Specifications of the Exchange Adapter, in this document.

For information on emulator debuggers and related products, please see the user’s manuals, additional documents
for user’s manuals, and application notes provided for the individual products. When you use an emulator from
another company for debugging, be sure to read the user’s manual for the given emulator.

Related Documents

Name of Document

Document No.

IE850A Emulator RTE0T0850AKCT00000J

User’s Manual

R20UT4461E

E2 Emulator RTE0T00020KCE00000R

User’s Manual

R20UT3538E

E2 Emulator, IE850A Emulator Additional Document for User’s Manual

(Notes on Connection of RH850/E2x Series)

R20UT4140E

Note: The contents of the related documents listed above may be changed without prior notice. Be sure to use

the latest versions of the documents, which can be downloaded from “Software and Tools” on the Renesas
Web page.

https://www.renesas.com/

«
1
2
3
4
5
...
»

Содержание RTE7702012EAB00000J






















































Отзывы:

Нет отзывов