Emulation Adapter
Outline
R20UT4460EJ0110 Rev. 1.10
Page 11 of 53
Nov. 01, 2019
1. Outline
This product is an emulation adapter for the RH850/E2UH and E2H groups of MCUs from Renesas Electronics
Corporation. Using this product with the separately sold exchange adapter enables emulation of the target device.
Features:
•
This product includes a debug chip (R7F702Z10AADBG) for the RH850/E2UH and E2H groups.
•
The combination of the emulation adapter connected to the base board included in the package is usable as a
simple evaluation board.
•
Using the emulation adapter with the exchange adapter allows connection to the target system and enables
emulation of the target device.
•
Connecting an emulator which supports Aurora tracing, such as the IE850A emulator (type name:
RTE0T0850AKCT00000J) from Renesas, enables debugging.
•
Using the attached 34-pin to 14-pin conversion connector enables connecting the emulation adapter to on-chip
debugging emulators and flash programmers, such as the E2 emulator (type name: RTE0T00020KCE00000R)
from Renesas.
•
The emulation adapter can operate as a stand-alone unit, i.e. without connection to an emulator.
1.1
Package Components
The package of this product consists of the following items. After you have unpacked the box, check if your
emulation adapter contains all of these items.
Table 1-1 Package Components for the Emulation Adapter
Item
Quantity
Emulation adapter: RTE7702012EAB00000J
1
Base board: RTE7702012EABBB000J
1
34-pin to 14-pin conversion adapter: RTE0T00020KCA30000J
1
Power-supply cable
1
Demounting lever
1
Jumper blocks for pin headers
5