Renesas RH850 F1 Series, Руководство пользователя

Страница: 22 / 44

RH850/F1x StarterKit V3 User Manual
R01UH0724ED0120 Page 22
January 2018
Jumper Setting Signal Device Port
J12 1-2 LAT P1_14
3-4 BLNK P1_15
5-6 MCLK P0_14
7-8 MOSI P0_13
9-10 MISO P0_12
Table 15. Blue LED Circle Signals
4.2.4 Digital inputs for Low Power Sampler (LPS)
Eight digital input signals, which are generated by a DIP switch array (S3), are provided to trigger
the microcontroller’s Low Power Sampler. The input signals are connected to the microcontroller
via 8 to 1 Multiplexer (IC4). When the DIP switches (S3) are changed during low power mode
(DeepSTOP mode), the microcontroller will wake up.
Please use the following jumper configuration to connect the DIP Switch and multiplexer to the
microcontroller
Jumper Description Setting Note
J9 Digital LPS input
to MCU
connector
1 – 2
DIN
↔
P8_1
3 – 4
SELDP0
↔
P0_4
5 – 6
SELDP1
↔
P0_5
7 – 8
SELDP2
↔
P0_6
9 – 10
DPO
↔
P0_0
Table 16. LPS Jumper Configuration
4.2.5 Pushbutton Switches
Two pushbutton switches (S1and S2) are provided to allow the switching of microcontroller input
port states. The switches are active low and normally open.
Switch Device signal Active Level Inactive State
S1 P0_9 (INTP12) low open
S2 RESET low open
Table 17. Pushbutton Switch Signals
Please use the following jumper configuration to connect the interrupt pushbutton switch (S1) to
the microcontroller.
Jumper Description Setting Note
J16 Interrupt Button to MCU connector 1-2
Button
↔
P0_9
Table 18. Interrupt Pushbutton Jumper Configuration