QB-78F1030
CHAPTER 1 GENERAL
R20UT0289JJ0100 Rev. 1.00
Page 4 of 28
Sep 30, 2010
1.3
System Configuration
This section shows the system configuration when using the QB-78F1030 connected to a PC (PC/AT
TM
compatible).
Connection is possible even without optional products.
Figure 1-1. System Configuration
<1>
<2>
<3>
<4>
<5>
<6>
<7>
<8>
<9>
<10>
<11>
<14>
<12>
<13>
<1> Host machine
: IBM PC/AT compatible can be used
<2> ID78K0R-QB Disk/Accessory Disk
: Debugger, USB drivers, manual, etc.
<3> USB interface cable
: Cable connecting QB-78F1030 to host machine
<4> AC adapter
: AC adapters classified by region
<5> QB-78F1030
: This product
<6> Check pin adapter (optional)
: Adapter used for monitoring waveforms with oscilloscope
<7> Emulation probe
: High-characteristic FPC type emulation probe
<8> Exchange adapter
: Adapter that performs pin conversion
<9> Space adapter
(optional)
: Adapter used for height adjustment
<10> YQ connector
: Connector that connects exchange adapter to target connector
<11> Target connector
: Connector soldered to target system
<12> Mount adapter
(optional)
: Adapter used for mounting target device into socket
<13> Device
: Target device
<14> Target system
