Renesas P9415-R-EVK, Руководство пользователя

Страница: 34 / 44

P9415-R-EVK Evaluation Kit
R16UH0015EU0100 Rev.1.0
May 27, 2021 Page 34
Table 26.System Interrupt Enable Register (0x34, 0x35, 0x36, 0x37) in Tx Mode
Address
and Bit
Register Field Name R/W
Default
Value
Function and Description
0x36 [7:0] Reserved R/W 0 Reserved
0x36 [7:0] Reserved R/W 0 Reserved
0x35 [7:1] Reserved R/W 0 Reserved
0x35 [0] CSP_RECEIVE_INT R/W 0
1 = Corresponding interrupt is enabled.
0 = Corresponding interrupt is disabled.
0x34 [7] TX_INIT_INT R/W 1
1 = Corresponding interrupt is enabled.
0 = Corresponding interrupt is disabled.
0x34 [6] GET_DPING_INT R/W 1
1 = Corresponding interrupt is enabled.
0 = Corresponding interrupt is disabled.
0x34 [5] MODECHNGED R/W 1
1 = Corresponding interrupt is enabled.
0 = Corresponding interrupt is disabled.
0x34 [4] GET_CFG_INT R/W 0
1 = Corresponding interrupt is enabled.
0 = Corresponding interrupt is disabled.
0x34 [3] GET_ID_INT R/W 0
1 = Corresponding interrupt is enabled.
0 = Corresponding interrupt is disabled.
0x34 [2] GET_SS_INT R/W 0
1 = Corresponding interrupt is enabled.
0 = Corresponding interrupt is disabled.
0x34 [1] START_DPING_INT R/W 1
1 = Corresponding interrupt is enabled.
0 = Corresponding interrupt is disabled.
0x34 [0] EPT_TYPE_INT R/W 1
1 = Corresponding interrupt is enabled.
0 = Corresponding interrupt is disabled.
Note : The bit definition in Rx mode and Tx mode is different.
The alignment registers provide information about the positioning of the RX coil relative the TX coil. The AP may
use this information to inform the user of possible reduced power transfer level due to receiver misalignment and
suggest repositioning of the RX to improve coupling. The magnitude of the alignment information depends on the
coil sizes and shall not be used for absolute distance measurement.
Table 27. Alignment X-Axis Register (0x38)
Address
and Bit
Register Field Name R/W
Default
Value
Function and Description
0x38 [7:0] Align[0] R – 8-bit signed integer representing X-axis alignment.
Table 28. Alignment Y-Axis Register (0x39)
Address
and Bit
Register Field Name R/W
Default
Value
Function and Description
0x39 [7:0] Align[1] R – 8-bit signed integer representing Y-axis alignment.