Renesas M-Station, Руководство пользователя

Страница: 67 / 82

M-Station Baseboard
When you click OK to close the FP4MST Flash Configuration box, the flash device is initialized and
its silicon signature read. If you change parameters that cause initialization to fail, such as changing
the communication port without changing necessary jumpers, you will receive a message and have the
opportunity to revise the configuration.
When changing the configuration from inside the FP4MST program, you should only change the
communication rate (to try higher SIO or UART communication rates) or set the .PRC file to be
automatically loaded.
9.4 Help Command Button
Clicking the Help command button displays the program name, version, date and copyright of the
FP4MST program.
9.5 Close Command Button
Clicking the Close button exits the FP4MST program, reapplies V
DD
power to the flash device, and
releases the RESET line, allowing the user program to run on the device.
59