Renesas M-Station, Руководство пользователя

Страница: 64 / 82

M-Station Baseboard
9.2.4.2 SSig Chk
Clicking the Ssig Chk command button initializes the device, reads its silicon signature, and then
displays that information in the Device box.
9.2.4.3 Blank Chk
Clicking the Blank Chk command button executes a blank check operation on the flash device, after
first initializing and checking the silicon signature. The Status window displays the progress of the
operation.
If the device is blank (erased), the Status window displays “Blank” at the end of the operation. If the
device is not blank, the Status window displays “Not Blank” and you receive this warning:
Click OK and then execute an Erase operation (subsection 9.2.4.4).
9.2.4.4 Erase
Clicking the Erase command button erases the flash device, after first initializing it and checking its
silicon signature. For some flash devices, a pre-write operation is done. After a pre-write operation (if
any), an erase operation is performed. This may take several seconds. After erasing, some flash
devices require an area write-back operation. The Status window shows the progress of erasing.
After completion, the Status window displays “Erased”.
56