11
Section 4 HDI Parameters
4.1
Address Areas
Table 4.1 lists the parameters for address areas (Area) that can be specified with HDI command
line interface or displayed as trace results.
Table 4.1
Address Area Parameters
HDI Parameter
(Trace Display)
Address Area
Description
rom
On-chip ROM
MCU's on-chip ROM, which can be
read but cannot be written to.
ram
On-chip RAM
MCU's on-chip RAM (except for DTC
RAM), which can be read and written
to.
IO16
(I/O-16)
Internal I/O registers
(16-bit bus)
MCU's internal I/O registers for the 16-
bit bus.
IO8
(I/O-8)
Internal I/O registers
(8-bit bus)
MCU's internal I/O registers for the
8-bit bus.
ext16
(EXT-16)
External area
(16-bit bus)
External area for the 16-bit bus, which
can be allocated to the user system
memory or the optional SIMM memory
module in the E6000.
ext8
(EXT-8)
External area
(8-bit bus)
External area for the 8-bit bus, which
can be allocated to the user system
memory or the optional SIMM memory
module in the E6000.*
Dtcram
(RAM/DTC)
DTC RAM
MCU's on-chip RAM for DTC.
Note:
When SIMM memory module is used for the external area, memory will always be
accessed via 16-bit bus. Therefore, the Trace window will always display EXT-16.
