manualshive.com logo in svg

Renesas Emulator System E8, Руководство пользователя

Поделиться
Скачать
Renesas Emulator System E8 Скачать руководство пользователя страница 39

3.5   Connecting the Emulator to the Host Computer 

This section describes how to connect the emulator to the host computer. For the position of each 
connector of the emulator, refer to section 3.2, Emulator Hardware Configuration.  

Notes:  1.  When [Add New Hardware Wizard] is displayed, select the [Search for the best driver 

for your device. (Recommended)] radio button and then the [Specify a location] check 
box to select the path to be searched for drivers. The location must be specified as 
<Drive>:\DRIVERS. (<Drive> is the CD drive name.) 

 

2.  Be sure to install the emulator’s debugger before putting the emulator in place. 

 

WARNING

 

Always switch OFF the emulator product and the user system 
before connecting or disconnecting any CABLES except for 
the USB interface cable. Failure to do so will result in a FIRE 
HAZARD and will damage the user system and the emulator 
product or will result in PERSONAL INJURY.  
The USER PROGRAM will be LOST. 

 

21

 

 

Содержание Emulator System E8







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды