Renesas Emulator System E8 Скачать руководство пользователя страница 10

Страница: 10 / 166

DEFINITION OF SIGNAL WORDS

Be sure to read and understand the warnings below before using this emulator. Note that these are
the main warnings, not the complete list.

This is the safety alert symbol. It is used to alert you to potential personal

injury hazards. Obey all safety messages that follow this symbol to avoid

possible injury or death.

DANGER

indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING

indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

CAUTION

used without the safety alert symbol indicates a

potentially hazardous situation which, if not avoided, may result

in property damage.

NOTE

emphasizes essential information.

Содержание Emulator System E8







































































































































































Результаты поиска

Содержание Emulator System E8

Отзывы:

Бренды по названию

Популярные бренды

Renesas Emulator System E8, Руководство пользователя

Результаты поиска

Содержание Emulator System E8

Отзывы:

Бренды по названию

Популярные бренды