Renesas Emulation Probe M306V8T-EPB Скачать руководство пользователя | Manualshive

Страница: 7 / 90

background image

M306V8T-EPB User’s Manual

Precautions for safety

REJ10J0777-0100 Rev.1.00 2005.08.01

Page 7 of 90

WARNING

Warnings for AC Power Supply:

If the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do not plug it
forcibly. Failure to comply may cause electric shock and/or fire.

Use an AC power cable which complies with the safety standard of the country.

Do not touch the plug of the AC power cable when your hands are wet. This may cause electric shock.

This product is connected signal ground with frame ground. If your developing product is transformless (not
having isolation transformer of AC power), this may cause electric shock. Also, this may give an unrepairable
damage to this product and your developing one.
While developing, connect AC power of the product to commercial power through isolation transformer in
order to avoid these dangers.

If other equipment is connected to the same branch circuit, care should be taken not to overload the circuit.

When installing this equipment, insure that a reliable ground connection is maintained.

If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then disconnect
power immediately by unplugging the AC power cable from the outlet.
Do not use this as it is because of the danger of electric shock and/or fire. In this case, contact your local
distributor.

Before setting up this emulator and connecting it to other devices, turn off power or remove a power cable to
prevent injury or product damage.

Warnings to Be Taken for This Product:

Do not disassemble or modify this product. Personal injury due to electric shock may occur if this product is
disassembled and modified. Disassembling and modifying the product will void your warranty.

Make sure nothing falls into the cooling fan on the top panel, especially liquids, metal objects, or anything
combustible.

Warning for Installation:

Do not set this product in water or areas of high humidity. Make sure that the product does not get wet. Spilling
water or some other liquid into the product may cause unrepairable damage.

Warning for Use Environment:

This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care should be
taken that this temperature is not exceeded.

«
...
5
6
7
8
9
...
»

Содержание Emulation Probe M306V8T-EPB



























































































Отзывы:

Нет отзывов

Похожие инструкции для Emulation Probe M306V8T-EPB

Бренд: National Instruments Страницы: 9

FIELDPOINT FP-1600

Бренд: National Instruments Страницы: 8

Бренд: MiLAN Страницы: 1

PacketShaper PS-S200

Бренд: Symantec Страницы: 2

ExpressBox2 EB2

Бренд: Magma Страницы: 74

Бренд: Airlink101 Страницы: 46

Slideaway CL1008

Бренд: ATEN Страницы: 77

Бренд: Accusys Страницы: 34

Бренд: MA lighting Страницы: 49

Бренд: Kontron Страницы: 62

Бренд: Altera Страницы: 33

Бренд: ZALMAN Страницы: 18

Бренд: Corsair Страницы: 12

Бренд: Rockwell Automation Страницы: 21

SATA II-150 PCI

Бренд: SIIG Страницы: 16

Бренд: ICP DAS USA Страницы: 62

Бренд: ICP DAS USA Страницы: 8

Бренд: PairGain Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды