3
1
4
5
2
NU739_4_G5-FRA.qxd 19/01/06 9:00 Page 5.17
NU739-4 - B73 C:\Documentum\Checkout\NU739_4_T5-ENG.win 20/3/2006 13:33 - page 17
5.17
WINDSCREEN WIPER BLADES
Replacing windscreen wiper
blades
1
- Lift wiper arm 3;
- remove the bottom of the blade
from its mounting by bending it
slightly
and
twisting
it
horizontally as far as it will go,
- slide the blade so that it passes
over retaining bracket 2.
To refit
To refit the wiper blade, proceed in
reverse order to removal. Make sure
that the blade is correctly locked in
position.
Windscreen washer jets
These can be adjusted using a tool
such as a flat-blade screwdriver.
Before using the rear
wiper, check that no
transported
object
obstructs the travel of the
blade.
• In frosty weather, make sure
that the wiper blades are not
stuck by ice (risk of motor
overheating).
• Monitor the condition of the
blades. Replace the wiper
blades as soon as they begin to
lose efficiency (approximately
once a year).
Rear screen wiper
4
- Lift the wiper arm 5.
- pivot blade 4 until some resistance
is met.
- remove the blade by pulling it.
To refit
To refit the wiper blade, proceed in
reverse order to removal. Make sure
that the blade is correctly locked in
position.