2
1
3
4
NU739_4_G2-FRA.qxd 2/02/06 16:43 Page 2.11
NU739-4 - B73 C:\Documentum\Checkout\NU739_4_T2-ENG.win 17/3/2006 11:35 - page 11
2.11
ASSISTED PARKING BRAKE
Applying the assisted parking
brake
Manual mode
Pull out and release handle 1.
Automatic mode
(depending on
the country)
The assisted parking brake ensures
automatic vehicle immobilisation
when the
engine is stopped by
pressing
the
engine
start/stop
button
.
In all other instances, e.g. engine
stalling, the assisted parking brake
is
not
applied
automatically.
Manual mode must be used.
Indicator light 3 on the dashboard
and indicator light 4 on the
instrument
panel
light
up
to
confirm that the assisted parking
brake has been applied. If the
parking brake has not been applied,
indicator lights 3 and 4 go out when
the doors are locked. The message
“Parking brake applied” appears on
the instrument panel.
Note:
When the driver's door is opened, if
the parking brake has not been
applied, a beep sounds and the
message “Parking brake released”
appears on the instrument panel.
In this case, to immobilise the
vehicle, you must pull and release
the handle 1.
For certain country-specific model
versions, the automatic application
function is not activated. Refer to
the information on manual mode.
Before
leaving
the
vehicle, check that the
assisted parking brake is
fully applied.
Indicator
lights
3
on
the
dashboard
and
4
on
the
instrument panel light up to
confirm that it has been applied.
Releasing the assisted parking
brake
Manual mode
To release the assisted parking
brake: with the engine running, pull
handle 1 while pressing unlocking
button 2 and release. Indicator
lights 3 and 4 go out.
Automatic mode
The
brake
will
be
released
automatically as soon as the vehicle
starts and accelerates.
The
message
“Parking
brake
released” appears on the instrument
panel.
