Renault MEGANE E-TECH 100% ELECTRIC 2022, Руководство пользователя

Страница: 265 / 414

2.123
ENG_UD74827_2
Aide au parking (BCB - Renault)
PARKING DISTANCE CONTROL
(4/6)
Adjustment
Depending on the vehicle, with the ve-
hicle stationary, engine running, some
settings can be adjusted from the multi-
media screen 4 .
Please refer to the multimedia instruc-
tions for further information.
Select “Settings”, “Parking assistance”.
Parking distance control audio
volume
Select “Settings”, “Parking assistance”,
“Sound”. Adjust the volume of the park-
ing distance control by pressing + or - .
System sound
Enables the system sound to be
chosen. Select “Settings”, “Parking as-
sistance”, “Sound”.
Deactivating the system sound
Activate or deactivate the parking dis-
tance control sound.
Note: if you deactivate the sound, you
will no longer be notified with beeps
when approaching an obstacle.
Deactivating the parking
distance control manually
You must disable the function if:
– if towing, carrying or trailer equip-
ment that is unrecognised by the
system is present in front of the ul-
trasonic detectors;
– in the event of damage to the ultra-
sonic sensors.
Parking distance control
automatic deactivation
The system deactivates:
– when the vehicle speed is above ap-
proximately 6 mph (10 km/h);
– depending on the model, when the
vehicle is stationary for more than
approximately 5 seconds and an ob-
stacle is detected (such as when in a
traffic jam, etc.);
– when you are in position N ;
When the vehicle is travelling at a
speed below approximately 6 mph
(10 km/h), some noises (motorcy-
cle, lorry, pneumatic drill etc.) may
trigger the beeping sound of the
parking distance control.
– when an operating fault is detected.
Note: if the vehicle is fitted with a
towbar recognised by the system, only
the rear Park Assist function is deacti-
vated.
Operating faults
When the system detects an operating
fault, a beep sounds for approximately
three seconds the first time reverse
gear is selected and is accompanied by
the message “Check Parking sensors”
shown on the instrument panel. Check
that your ultrasonic sensors are clean.
If the message remains, contact an ap-
proved dealer.