Renault MEGANE E-TECH 100% ELECTRIC 2022, Руководство пользователя

Страница: 150 / 414

2.8
ENG_UD75611_2
Commande de vitesse, levier électronique (BCB - Renault)
As position
P
is
automatically en-
gaged
when the engine is stopped, in
some situations (e.g. when using some
car washes) it may be necessary to
engage position
N
:
– With the engine running, press the
P
button, move the selector lever 1
one notch upwards or downwards to
change to position
N
, then stop the
engine;
– with the engine off and the ignition
on, move the selector lever 1 one
notch upwards or downwards then
switch off the ignition.
The next time the engine is restarted,
position
P
is engaged automatically ac-
cording to the cases described earlier.
Parking the vehicle
Position P is engaged automatically
and, if fitted, the electronic parking
brake is applied when:
– the engine is stopped;
– the driver’s seatbelt is unbuckled and
the vehicle is stopped;
and
– the driver’s door is opened and the
vehicle is stopped.
P is displayed on the instrument panel.
For safety reasons, do not
switch off the ignition before
the vehicle has come to a
complete standstill.
GEAR CONTROL, ELECTRONIC LEVER
(4/4)
Operating faults
In the event of an engine fault or an
electrical fault (battery fault, etc.), make
sure that the vehicle is properly immo-
bilised.
An impact to the under-
side of the vehicle while
manoeuvring (e.g.: strik-
ing a post, raised kerb or
other street furniture) may result in
damage to the vehicle (e.g.: defor-
mation of an axle).
To avoid any risk of accident, have
your vehicle checked by an ap-
proved Dealer.
P position must only be engaged
when the vehicle is stationary.