Renault MEGANE E-TECH 100% ELECTRIC 2022, Руководство пользователя

Страница: 236 / 414

2.94
ENG_UD75204_2
Régulateur de vitesse adaptatif Stop and Go (BCB - Renault)
Exceeding the cruising speed
The cruising speed may be exceeded
at any time by applying the accelerator
pedal.
If it is exceeded, the cruising speed
9
appears in yellow.
The distance gauge flashes if the dis-
tance between your vehicle and the
vehicle in front is less than the safe
distance selected: the Safe Distance
Control function is no longer active.
ADAPTIVE CRUISE CONTROL STOP AND GO
(12/22)
Then, release the accelerator pedal:
the cruise control and safe distance
control will automatically resume the
speed and distance instructions that
you had previously selected.
Overtaking manoeuvre
If you wish to overtake the vehicle in
front, activating the indicator will tem-
porarily cancel the safe distance con-
trol and enable an acceleration speed
sufficient to complete overtaking.
Stopping the vehicle and
setting off
If the vehicle in front slows down, the
system adapts its speed to bring the
vehicle to a complete stop if necessary
(e.g. in heavy traffic). The vehicle stops
a few metres from the vehicle in front.
When the vehicle in front sets off again:
– if the stop lasts for less than thirty
seconds, the vehicle will start again
without any action required from the
driver.
9
Note:
the driver should always be
ready for sudden incidents while
driving and remains responsible for
controlling the vehicle: if the system
detects a pedestrian in the vehicle
environment, automatic restart will
be inhibited until the next stop;
– if the stop exceeds around thirty sec-
onds, you must apply the accelera-
tor pedal or press button 3 (RES/+)
upwards for the vehicle to set off
again. The message "Press RES or
accelerate to restart Cruise Control"
appears on the instrument panel to
confirm.
If the stop exceeds around three min-
utes, the electronic parking brake is au-
tomatically applied and the Stop and
Go adaptive cruise control is deacti-
vated.
The

indicator light goes out to
confirm that the function is deactivated.