Renault Lodgy 2017, Руководство водителя

Страница: 53 / 238

trip computer and warning system........(up to the end of the DU)
warning lights........................................(up to the end of the DU)
instrument panel messages..................(up to the end of the DU)
instrument panel ...................................(up to the end of the DU)
1.49
ENG_UD46529_7
Ordinateur de bord (X92 - Renault)
Trip computer and warning system
TRIP COMPUTER AND WARNING SYSTEM
(1/6)
Interpreting some of the
values displayed after
resetting
The values showing average fuel con-
sumption, range and average speed
will become more stable and reliable
the further you travel after pressing the
reset button.
For the first few miles after pressing the
reset key you will notice that the range
increases as you travel. This range
takes into account the average fuel con-
sumption since the last time the reset
button was pressed. Therefore, the fuel
consumption may decrease when:
– the vehicle stops accelerating;
– the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed);
– when driving from an urban area
onto the open road.
Resetting is automatic when the maxi-
mum capacity of any of the memories
is exceeded.
On-board computer 1
Display selection key
2
The display depends on the vehicle and
the country.
Scroll through the following information
by pressing the button 2 :
a) Total mileage recorder
b) Trip mileage recorder
c) Fuel consumed
d) Average fuel consumption
e) Current fuel consumption
f) Estimated range
g) Distance travelled
h) Average speed
i) Oil change interval
j) Reset the tyre pressure
k) Speed limiter
l) Clock
m) Exterior temperature information.
Refer to the table on the following
pages showing display examples.
Resetting the trip mileage
To reset the trip mileage recorder, the
display must show the Trip mileometer
function.
Press and hold button
2 .
1
2