1
2
NU701-5_fra_G3.qxd 31/03/04 10:32 Page 3.21
x76 - KANGOO NU 701-5
C:\Documentum\Checkout\NU701_5_T3-ENG.win 18/6/2004 16:50
- page 21
3.21
REAR BENCH SEAT (operation)
To fold down the bench seat
Move one of the two levers 1 on the
right or left-hand side of the bench
seat forwards.
For a single section bench seat and
seatback, arrange
the centre belt flat
on the seat before folding down the
seatback.
For the split bench seat and
seatback, place the headrests in the
storage position, then fold back the
smaller section of the seatback first
followed by the larger section.
Lift the rear seat cushion towards
the front by pulling the two rings 2,
one after the other.
Fold the seat cushion and the
seatback into a vertical position.
We would advise you to move the
front seats forward slightly to make
it easier to fold down the seatback
with the headrests in position.
Make sure the headrests are in the
correct position when the seat is
returned to its upright position.
