Renault Clio Cup, Руководство пользователя, Страница: 56 / 69

2010 Release
E-56
4.7.2 NEW WISHBONE MOUNTING
The wishbones can only be purchased with their A and B casings already fitted. You only
have to mount the ball joints 77 11 128 370 :
 Fit the snap ring 77 11 162 563 in its groove (B casing)
 Heat the casing (oven) et cool the ball joint (freezer)
Do not heat the complete wishbone more than 100°C not to damage the point
E ball joint.
 Fit the ball joint using a pressing machine leaning on the external ring of the
ball joint, without glue (If you do not have a press, a vice should be sufficient)
 Fit the snap ring 77 11 128 850
 Repeat this procedure for the 3 other ball joints
! WARNING !
Without either heating the casing or cooling the ball joint, you could
damage the parts because of too important force. Be careful to not deform the inner
shoulder of the B casing.
To ease the understanding of the fitting on the car, hereafter is a cut view of a left
wishbone mounted on the subframe :
Point A bolt:
Screw : 77 11 162 527
Under head washer : 77 11 156 931
Locknut : 77 03 034 115
Tightening torque : 80 N.m
Point B bolt :
Screw :
77 11 156 908
Under head washer : 77 11 156 931
Locknut : 77 03 034 115
Tightening torque : 80 N.m