Renault Clio Cup, Руководство пользователя, Страница: 15 / 69

2010 Release
E-15
-
Refitting
Perform the removal steps in reverse order.
Check front axle geometry and adjust if necessary.
Note: The wishbone mounting bolts on the subframe should be tightened when
the vehicle is completely static.
Tightening torques:

Point E nut: 105Nm .

Wishbone point A bolt: 80Nm .

Wishbone point B bolt: 80Nm .
Wishbone ball joints
In case of replacement, the new part
must be fitted in the same position: the
shoulder area of the A casing must rest
on the wishbone machined surface (1) .
In case of replacement, the new part must
be fitted in the same position: the shoulder
area of the B casing must rest on the
wishbone machined surface in order to
permit the fitting of the snap ring
(1) .
Front of vehicle
1
1