Renault ?aptur, Руководство пользователя

Страница: 107 / 229

parking distance control........................(up to the end of the DU)
driving ...................................................(up to the end of the DU)
reversing sensor ...................................(up to the end of the DU)
2.29
ENG_UD29009_1
Aide au parking (X87 - Renault) ENG_NU_1007-1_X87_Renault_2
Parking distance control
operating principle
Ultrasonic detectors, installed in the
rear bumper (depending on the vehi-
cle), measure the distance between the
vehicle and an obstacle whilst revers-
ing.
This measurement is indicated by
beeps which become more frequent the
closer you come to the obstacle, until
they become a continuous beep when
the vehicle is approximately 30 centi-
metres from the obstacle.
Nb: make sure that the ultrasonic sen-
sors are not obscured (by dirt, mud,
snow, etc.).
PARkING DISTANCE CoNTRoL
(1/2)
operation
When reverse gear is selected, most
objects which are less than approxi-
mately 1.20 metres from the rear of the
vehicle are detected, a beep sounds
and, depending on the vehicle, the dis-
play 1 comes on.
Note: depending on the vehicle, the
screen 1 shows the vehicle surround-
ings alongside the beeps.
This function is an additional aid that indicates the distance between the
vehicle and an obstacle whilst reversing, using sound signals.
Under no circumstances should it replace the driver’s care or responsibil-
ity whilst reversing.
The driver should always look out for sudden hazards during driving: always
ensure that there are no moving obstacles (such as a child, animal, pram or bi-
cycle, etc.) or small, narrow objects such as stones or posts in your path when
manoeuvring.
1