Renault 2013 Formula 1.6, Руководство пользователя

Страница: 36 / 44

Release 1.0 - 24/04/2013
36
7.12. Gear shift setup
- Pull the gear shift level to upshift. No need to use clutch and to throttle off.
The ignition cut is automatic and has to be set-up.
There is a switch cut on the left side of the gear box at the end of the
barrel drive axle. It’s screwed with shims to adjust its position. Each car is
delivered with a set of shims. When reducing the thickness of the shims,
the ignition cut is earlier in the level movement.
-
As soon as the barrel drive axle starts moving (first mm), the ignition has
to be cut off. It’s possible to check the cut off position without running
engine.
- Switch ignition on. The EDiag LED on the right of the dashboard is
flashing. When pushing the barrel drive axle, the LED turns on
permanently
.