Renault 2013 Formula 1.6, Руководство пользователя

Страница: 33 / 44

Release 1.0 - 24/04/2013
33
2
making sure is correctly seated in its housing
-
Install the lip seal in the back housing after checking its condition
-
Extract the external ring from the main casing hitting the ring by the 3
dedicated holes (2)
-
Clean and check the condition of the bearing journal
- Put the new ring using a press and making sure is correctly seated in its
housing
-
Remove the secondary shaft bearing using possibly the tool FACOM (ref.
U.53T1) taking care not to damage the bearing journal
-
Clean and check the condition of the bearing journal
-
Install the new bearing using a press and making sure it is well positioned
against the spacer adjuster
- Reinstall the differential and the gears (see 7.5)
-
Reinstall the front plate. (tighten the 11xM6 bolts bonded with LOCTITE
222 to 0.5DaN.m)
Differential bearings
-
Remove the differential (see 7.7)
-
Remove the differential case
bearings (1) using a press and
taking care not to damage it
-
Clean and check the parts
condition.
-
Fit the new bearings using a
press making sure it is correctly
seated on its journal.
2
1
2
1