Renault 2009 X79, Руководство пользователя

Страница: 49 / 54

62A - 18
AIR CONDITIONING
Refrigerant pipe seal: Removal - Refitting
62A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a
a
Drain the refrigerant circuit using the refrigerant
charging station (see Refrigerant circuit: Drain-
ing - Filling) .
a
Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a
Remove the connecting pipe concerned:
- (see Condenser - evaporator connecting pipe:
Removal - Refitting) ,
- (see Condenser - expansion valve connecting
pipe: Removal - Refitting) ,
- (see Rear condenser - front condenser con-
necting pipe: Removal - Refitting) ,
- (see Evaporator - dehydrator reservoir con-
necting pipe: Removal - Refitting) ,
- (see Compressor - rear condenser connecting
pipe: Removal - Refitting) ,
- (see Condenser - evaporator connecting pipe:
Removal - Refitting) ,
- (see Compressor - dehydrator reservoir con-
necting pipe: Removal - Refitting) ,
- (see Dehydrator reservoir - rear expansion
valve connecting pipe: Removal - Refitting) ,
- (see Main expansion valve - additional expan-
sion valve pipe: Removal - Refitting) ,
- (see Expansion valve - intermediate pipe con-
necting pipe at the expansion valve outlet: Re-
moval - Refitting) ,
- (see Dehydrator reservoir - expansion valve
connecting pipe: Removal - Refitting) ,
- (see Condenser - dehydrator reservoir con-
necting pipe: Removal - Refitting) ,
- (see Expansion valve - compressor connecting
pipe: Removal - Refitting) ,
- (see Expansion valve - rear expansion valve
connecting pipe: Removal - Refitting) ,
- (see Rear expansion valve - compressor con-
necting pipe: Removal - Refitting) ,
- (see Compressor - condenser connecting pipe:
Removal - Refitting) ,
Special tooling required
Car. 1363 Set of tr im removal levers.
Equipment required
refrigerant charging station
compressed air nozzle
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair:
- (see Air conditioning: Precautions for the
repair) ,
- (see Vehicle: Precautions for the repair) (01D,
Mechanical introduction).
WARNING
To prevent moisture from entering the system,
place plugs on the cold loop components which are
open to the air.
WARNING
Do not remove the blanking plugs from each com-
ponent until the last moment.
Also, do not remove the components from their
packaging until they are to be fitted to the vehicle.
Note:
Use blanking plugs for the fuel circuits with part
numbers 77 01 208 229 or 77 01 476 857 to plug
any openings exposed to the open air. They must
be clean. Do not use any which have already been
used to plug a fuel circuit.
WARNING
Consult the device's operating manual to avoid
incorrect use.