Renault 2009 X79, Руководство пользователя

Страница: 43 / 54

62A - 12
AIR CONDITIONING
Compressor: Removal - Refitting
AIR CONDITIONING
62A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a
Drain the coolant circuit using the refrigerant
charging station (see Refrigerant circuit: Drain-
ing - Filling) .
a
Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a
Remove:
- the front bumper (see Front bumper: Removal -
Refitting) and (see Exterior body front trim as-
sembly: Exploded view) (55A, Exterior protec-
tion),
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the accessories belt (see Accessories belt: Re-
moval - Refitting) (11A, Top and front of engine).
II - REMOVAL OPERATION
a
Remove:
- the pipe retaining bracket bolt (1) on the compres-
sor,
- the pipe union bolts (2) on the compressor.
Equipment required
refrigerant charging station
Tightening torques
m
compressor bolts 21 N.m
pipe union bolts 8 N.m
pipe retaining bracket
bolt on the compressor 21 N.m
IMPORTANT
Consult the safety instructions and cleanliness
advice and the operation recommendations before
carrying out any repairs (see Air conditioning:
Precautions for repair).
WARNING
To prevent moisture from entering the system,
place plugs on the cold loop components which are
open to the air.
Note:
Use blanking plugs for the fuel circuits with part
numbers 77 01 208 229 or 77 01 476 857 to plug
any openings exposed to the open air. They must
be clean. Do not use any which have already been
used to plug a fuel circuit.
WARNING
Consult the device's operating manual to avoid
incorrect use.
K4M
145190