Renault 2009 X79, Руководство пользователя

Страница: 41 / 54

62A - 10
AIR CONDITIONING
Condenser: Removal - Refitting
AIR CONDITIONING
62A
Location and specifications (tightening torques, parts
always to be replaced, etc.) (see 62A, Air condition-
ing, Air conditioning: List and location of compo-
nents, page 62A-1) .
REMOVAL
I - REMOVAL PREPARATION OPERATION
a
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a
Drain the coolant circuit using the refrigerant
charging station.
a
Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a
Remove the front bumper (see Front bumper as-
sembly: Exploded view) and (see Exterior body
front trim assembly: Exploded view) (55A, Exteri-
or protection).
a
Remove:
- the air deflector mountings (1) ,
- the air deflector (2) .
a
Remove the intercooler (see ) (12B, Turbocharging).
II - REMOVAL OPERATION
a
Remove the bolts from the pipes on the condenser
(see 62A, Air conditioning, Air conditioning: List
and location of components, page 62A-1) .
a
Disconnect the pipes from the condenser (see 62A,
Air conditioning, Air conditioning: List and loca-
tion of components, page 62A-1) .
a
Fit blanking plugs on the pipe openings.
a
Remove (see 62A, Air conditioning, Air conditio-
ning: List and location of components, page
62A-1) :
- the condenser bolts,
- the condenser.
Equipment required
refrigerant charging station
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see Air conditioning: Precautions for the
repair) .
WARNING
To prevent moisture from entering the system,
place plugs on the cold loop components which are
open to the air.
Note:
Use blanking plugs for the fuel circuits with part
numbers 77 01 208 229 or 77 01 476 857 to plug
any openings exposed to the open air. They must
be clean. Do not use any which have already been
used to plug a fuel circuit.
WARNING
Consult the device's operating manual to avoid
incorrect use.
145079
K9K
WARNING
In order to avoid any refrigerant leaks, do not
damage (deform, twist, etc.) the pipe.