bulbs
changing .........................................(up to the end of the DU)
changing a bulb ....................................(up to the end of the DU)
lights:
dipped beam headlights ..................(up to the end of the DU)
lights:
direction indicators ..........................(up to the end of the DU)
lights:
side lights ........................................(up to the end of the DU)
lights:
main beam headlights ......................................(current page)
bulbs
changing .........................................(up to the end of the DU)
lights
front .................................................(up to the end of the DU)
indicators ..............................................(up to the end of the DU)
lights
changing bulbs ................................(up to the end of the DU)
5.15
ENG_UD14672_3
Projecteurs avant avec lampes halogènes : remplacement des lampes (X85 - B85 - C85 - S85 - K85 - Renault)
ENG_NU_853-3_BCSK85_Renault_5
It is
essential
to use anti-U.V. 55W
bulbs so as not to damage the plastic
on the headlights.
Do not touch the bulb glass. Hold it
by its base.
Mark the bulb’s position before removal
to ensure correct positioning when re-
placing.
When the bulb has been changed,
make sure you refit the cover correctly.
However, because parts need to be
removed,
you are advised to have
your bulbs replaced by an approved
dealer.
Vehicle without additional
cornering lights
Dipped beam headlight
Remove cover
A
.
Tilt bulb holder
1
to release it and then
replace the bulb.
Bulb type:
H7
Headlights (changing bulbs)
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
HALOGEN HEADLIGHTS: changing bulbs
(1/3)
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
A
Main beam headlight
Remove cover
B
.
Pull out connector
2
and pull the bulb
holder
3
to replace the bulb.
Bulb type:
H7
B
1
2
3