![Renault 2009 CLIO Скачать руководство пользователя страница 198](http://html1.mh-extra.com/html/renault/2009-clio/2009-clio_handbook_1439580198.webp)
hubcap tool ...........................................(up to the end of the DU)
trims ......................................................(up to the end of the DU)
5.10
ENG_UD10599_1
Enjoliveur - Roue (X85 - B85 - C85 - S85 - K85 - Renault)
ENG_NU_853-3_BCSK85_Renault_5
Wheel trims - wheel
We would advise you to note down
the number engraved on the tool so
that you can replace it if it is lost.
Central wheel hubcap
(example: hubcap
4
)
To remove it, insert the hubcap tool
6
(located in the tool kit) into recess
5
.
To refit it, position it in line with recess
5
and tighten it with tool
6
.
Hubcap (example hubcap
1
)
Remove the wheel trim using hubcap
tool
2
(located in the tool kit) by en-
gaging the hook in the opening near
valve
3
.
To refit it, align it with valve
3
. Push the
retaining hooks in fully, starting with
side
A
near the valve, followed by
B
and
C
, finishing at
D
opposite the
valve.
WHEEL TRIMS - WHEEL
1
4
5
6
2
3
D
C
A
B
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then position
it correctly in its housing: there is a
risk of injury.
If wheel bolts are supplied in the
tool kit, only use these bolts for the
emergency spare wheel: refer to the
label affixed to the emergency spare
wheel.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.