Renault 2005 Megane, Руководство пользователя

Страница: 93 / 250

1
NU761_1_G1-FRA.qxd 20/07/05 11:37 Page 1.83
EXTERIOR LIGHTING AND SIGNALS
(continued)
Switching on the main
á
beam headlights
With the dipped beam headlights
lit, pull the stalk towards you.
When the main beam headlights are
lit, an indicator light lights up on
the instrument panel.
To return to the dipped headlight
position, pull the stalk towards
you.
“See-me-home” Function
This function (useful, for example,
to light the way when opening a
gate, a garage door, etc.), enables
you to temporarily switch on the
dipped beam headlights.
With the engine and the lights
switched off
, and the end of the
switch stalk 1 in position 0 , pull
the switch stalk 1 towards you:
the dipped beam headlights are
switched on for approximately
thirty seconds.
This action may be carried out no
more than four times for a
maximum lighting period of two
minutes.
To switch off the lights before they
go out automatically, turn the end
of stalk 1, then return it to position
0.
Switching off the lights
Manual operation
There are two possibilities:
- return stalk 1 to its original
position;
- the lights go out when the engine
is stopped, when the driver’s
door is opened or when the
vehicle is locked. In this case,
the next time the engine is started
the lights will be switched back
on according to the position of the
stalk 1.
Automatic operation (depending
on vehicle)
The lights go out when the engine
is stopped, when the driver’s door
is opened or when the vehicle is
locked.
Lights on warning buzzer
If the lights are on after the engine
is switched off, a warning beep
sounds when the driver’s door is
opened to warn you that the lights
are still on.
1.83
NU761_1_G1-ENG.qxp 01-Sep-05 15:52 Page 1.83 (Black plate)