RR-Addendum_COUNTERWEIGHTS_2017-09
In three locations, connect the cables to the counterweights and tighten the nuts that hold
them in place.
Connect the hanging cables to the bottom of the door and screen using openings B & D.
Using pliers, remove the four caps on the back side of the blocking rods. Through opening A,
ensure the cable is on the pulley, and then grab hold of the cable and pull to lift the
counterweight off the blocking rod. Remove the blocking rod. Repeat for the right side.
Slide the door /screen system up and down to verify they are functioning smoothly
If you have feedback about the new changes, please contact us at
