Association V2
Basic
Battery
Configuration V2
Device Reset Locally
Firmware Update Md V3
Manufacturer Specific V2
Powerlevel
Security
Sensor Multilevel V7
Thermostat Fan Mode V4
Thermostat Mode V3
Thermostat Setpoint V3
Version V2
Zwaveplus Info V2
Explanation of Z-Wave specific terms
Controller
— is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall
controllers.
Slave
— is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
Primary Controller
— is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
Inclusion
— is the process of adding new Z-Wave devices into a network.
Exclusion
— is the process of removing Z-Wave devices from the network.
Association
— is a control relationship between a controlling device and a controlled device.
Wakeup Notification
— is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
Node Information Frame
— is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.
(c) 2019 Z-Wave Europe GmbH, Antonstr. 3, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwave.eu. The template is maintained by
Z-Wave
Europe GmbH
. The product content is maintained by
Z-Wave Europe GmbH
, Supportteam, [email protected]. Last update of the product data: 2019-05-16
13:47:14
http://manual.zwave.eu/backend/make.php?lang=en&sku=REMEZXT600
6 z 6
22. 7. 2019, 13:29
