4
The premise to use "One button self-programming" to program RMC-xxxCHML to the
receivers.
The receivers of the original remotes you copy must support "Remote programming" or "Air
programming" in order to trigger this function successfully.
If you are not sure whether your receiver supports "Remote programming" or not, please refer to our
compatibility list(those brands that were marked with a orange star).
How to trigger "One button self-programming"?
Just keep pressing the button you would like to program to the receiver for around 7 seconds.
After the LED light of RMC-xxxCHML starts to flash, you can release the button and usually you can hear a
"Click" sound from the receiver after the whole procedure is completed.
Importance notice regarding "One button self-programming" before you copy:
If you want to use this function, the original remote you copy to RMC-xxxCHML must be the one already
programmed to the receiver in advance.
If you copy a original remote not yet be programmed to the receiver, "One button self-programming"
wont' be successful.
How to solve the possible "Out of sync" of the original remote after "One button
self-programming"?
For some brands, the original remote will become "Out of Sync" which means that you will temporarily
not be able to operate the receiver by original remote after you program RMC-xxxCHML to the receiver
by "One button self-programming".
Just press the buttons of original remote for several times (more than 5 times) and it will be OK to
operate with the receiver again. This will happen only one time after you use " One button
self-programming" to program RMC-xxxCHML to the receiver. Once the original remote become "On
sync" after you press the button couple more times, this situation will not happen again.
