2
Step 1.
Keep pressing the 2nd & 3rd buttons of remote A simultaneously for around 2 sec.; When the Red light
starts to flash every 0.5 sec., it enters duplicating mode and you can release the buttons now.(If you do not
press any button or the reading is failure, it will stop flashing after 25 sec.)
Step 2.
(For common frequencies: 434MHz, 868MHz, 370MHz & 315MHz) Suggest to transmit the Seed Code of
remote B within 4sec.;
(For other frequencies-
REMARK 1
) Suggest to transmit the Seed Code of remote B after 4sec.;
when the Red light of remote A goes off 2 times repeatedly, the Seed Code is read successfully.
Step 3.
Within 12 sec., press first button of remote B; when the LED of remote A turns green, press the button of
remote A that you would like to store within 5 sec.; the light will turn orange and then keep flashing Red
light(ready to read next button).
Step 4.
Repeat Step 3. to copy next button until you finish the duplication of all buttons of remote B.
Or
(REMARK 2)
Repeat Step 2.(transmit the Seed code within 12 sec.) & Step 3. until you finish the
duplication of all buttons of remote B.
Step 5.
Wait 12 sec. until the Red light of remote A stop flashing(or reload the battery) to finish the duplication
procedure. The LED light will be
Orange
under Rolling code transmitting mode.
Copy Fixed code remotes
Step 1.
Keep pressing the 2nd & 3rd buttons of remote A simultaneously for around 2 sec.; When the Red light
starts to flash every 0.5 sec., it enters duplicating mode and you can release the buttons now.(If you do not
press any button or the reading is failure, it will stop flashing after 25 sec.)
Step 2.
Within 5 sec., press the 1st button of remote A and release it.(Enter fixed code duplication mode and you
can only copy fixed code remotes under this mode -
REMARK 3
)
Step 3.
Press first button of remote B; when the LED of remote A turns green, press the button of remote A that
you would like to store within 5 sec.; the light will turn orange and then keep flashing Red light(ready to
read next button).
Step 4.
Within 12 sec., repeat Step 3. to copy next button until you finish the duplication of all buttons of remote B.
