3
Step 5.
Wait 12 sec. until the Red light of remote A stop flashing(or reload the battery) to finish the duplication
procedure. The LED light will be
Green
under Fixed code transmitting mode.
<REMARK>
1. Except frequencies 434MHz, 868MHz, 370MHz & 315MHz, you will need to wait longer time after
pressing the buttons until RMC-xxxCHML read correct frequency.
2. For some rolling code remotes, there are Seed Codes for every buttons(ex. 4 Seed codes for 4 buttons
respectively), such as FAAC & Genius.
3. If you would like to copy fixed code remote & rolling code remote into one RMC-xxxCHML at the same
time, please reload the battery to leave the copying mode after you copy one type(fixed code) and
restart the procedure to copy another type(rolling code) of remotes.
4. If you would like to copy several remotes with different frequencies into one RMC-xxxCHML, please
reload the battery(or wait until the LED is off) to leave the copying mode after you copy one
frequency(ex. 434MHz) and restart the procedure to copy another frequency(ex. 868MHz).
◎
◎
C
C
O
O
P
P
Y
Y
V
V
I
I
A
A
D
D
U
U
P
P
L
L
I
I
C
C
A
A
T
T
O
O
R
R
H
H
C
C
D
D
-
-
9
9
0
0
0
0
The procedure is same as our other REMOCON programmable remote controls. Please refer to our
instruction manual of HCD-900.
<REMARK>
if you would like to copy both fixed code remotes & rolling code remotes into RMC-xxxCHML via HCD-900,
please ensure to copy fixed code remotes first(in FixedCode Duplicate mode) and then copy rolling code
remotes(in HoppingCode Duplicate mode). If you do it reversely, the rolling code programmed will be
covered by fixed code you copy later.
◎
MAIN FEATURE: "ONE BUTTON SELF-PROGRAMMING".
What is "One button self-programming"?
All new Rolling code remotes must be programmed to the receiver before use. If you don't have the
original instruction manual about how to program new remote to the receiver or you don't want to open
the outer case of the receiver, you can use " One button self-programming " to program
RMC-xxxCHML(after copy) to the receiver remotely by just one simple step without knowing how to
program new remote to the receiver or opening the outer case.
