Remock Lockey RLMGG3040, Руководство пользователя

Страница: 24 / 44

USERS
­ Controllers: You can see the registered controllers of the motorized cylinder. If you touch any user, you can reach the dedicated page to edit
the name or remove the controller.
­ Enroll new controller: In this tab, you can add, edit or delete (except the master controller), to other controllers or users that operate with
mobile phone, remote control of other Remock Lockey devices or other accessories of the manufacturer.Your motorized cylinder can be paired
with up to 40 controllers. To add a new controller, touch the green "+" button. After touching the button you will hear a long warning tone. After
that tone, you must send the open or close signal through the new controller as explained below in order for this new controller to be paired:
­ Remote control: press any of the two buttons (open or close). The control will be paired and you can control the cylinder simultaneously
with some Invisible Lock.
­ Additional mobile phone: the RL Magic app has to be downloaded and installed. You will have to choose the language and define a user
account. Subsequently, on the mobile phone defined as master controller, go to the "Users" tab and touch the green "+" button that
appears after clicking on "Enroll new controller". The motorized cylinder will emit a long warning tone (5 seconds) and then a short tone.
Now, again on the new mobile phone to pair, tap "+" in the upper left corner to see the list of available motorized cylinders. Tap the line of
the cylinder to be paired and define a name for the device. After touching the green mark, if the match is successful, you will hear two
cylinder tones and the additional mobile phone will be a new controller.
­
Delete all remote controllers:
If you want to delete all motorized cylinder controllers, touch "Delete all remote controllers". The master
controller can not be deleted using this menu item.
REPORT
In this tab you can see which user locked or unlocked the device with date and time information.
If you touch the menu button in the upper right corner when the application is connected to the motorized cylinder as the master controller, you
will arrive at the configuration menu of the connected motorized cylinder. You can change the configuration of your motorized cylinder and
perform administrative activities through this menu.
Before using your intelligent cylinder, the settings for "direction of closing rotation" and "number of turns" must be adjusted
correctly. Otherwise, it will damage the mechanical structure of the device.
The related menu has 4 tabs: . Device Info, Knob Settings, Users, Reports
DEVICE INFORMATION
In this tab, you can see the following information: Device name, Device Type , Device Firmware Version , Battery Level , Number of Enrolled
Controllers , Number of Operations (Locking or unlocking) .If you want to remove the connected device from your mobile application, touch the
"Delete device" button in this menu.
KNOB SETTINGS
In this tab there are the following menu items:
­ Buzzer of knob: You can activate / deactivate the activation sounds that the cylinder emits.
­ Delayed locking: If this function is activated, when it is going to leave, and if you touch the control button defined as closing button of the
motorized cylinder, the cylinder will close automatically after 10 seconds.
­ Auto lock: If this function is activated, your device will close automatically after 1 minute after opening.
­ Auto disconnection time: You can adjust (in steps of 5 seconds) the period of time that the application remains connected to the motorized
cylinder once it is connected.
­ Invert locking way: You may have to change the direction of closure according to the way in which the door is located in which you will use your
motorized cylinder.
­ Adjust number of turns: Before using your motorized cylinder, you may need to adjust the number of laps of your motorized cylinder. To do
this, close the door and then press the "Rotating blue arrow" button. The motorized cylinder will close and then open to set the number of turns.
­ Latch retraction period: It is possible that you have to adjust the period of time during which the motorized cylinder keeps the latch inside when
it opens. You can do it between 1 and 9 seconds.
24
Configuration of the Motorized Cylinder
Administration Menu