22
REMKO VRS EN Series
The units are designed exclusively
for heating and ventilation
purposes in industrial or
commercial use (not for living
space heating in private use) on
the basis of their structural design
and equipment.
The unit design allows the use of
air ducts on the intake and outlet
side or unit accessories with the
appropriate fan and motor design.
In the standard version, the units
are not designed for exclusive use
as supply air units.
The units must only be operated
by appropriately instructed
personnel.
The manufacturer shall not
be liable for damage resulting
from non-observance of the
manufacturer's specifications,
the respective local legal
requirements or from unauthorised
alterations to the units.
Customer service and
guarantee
As a prerequisite for any guarantee
claims to be considered, it is
essential that the ordering party
or its representative completes
and returns the
“Certificate of
guarantee”
to REMKO GmbH &
Co. KG at the time when the units
are purchased and commissioned.
The units were tested at the
factory
several times to verify their correct
function.
However, if malfunctions should
arise that cannot be remedied by
the operator with the assistance of
the troubleshooting section, please
contact your specialist dealer or
contractual partner.
Intended use
Disposal of packaging
When disposing of packaging
material, please consider our
environment.
Our units are carefully packed
and delivered in stable transport
packaging and, if applicable, on a
wooden pallet.
The packaging materials are
environmentally-friendly and can
be recycled.
By recycling packaging materials,
you make a valuable contribution
to the reduction of waste and
conservation of raw materials.
Therefore, only dispose of
packaging material at appropriate
collection points.
Disposal of the old unit
The manufacturing process for
the units is subject to continuous
quality control.
Only high-grade materials are
processed, the majority of which
are recyclable.
You also contribute to
environmental protection by
ensuring that your old equipment
is only disposed of in an
environment friendly manner.
Therefore, only bring the old
unit to an authorised recycling
business or to an appropriate
collection point
.
NOTE
Operation that differs from
that specified in this operating
manual is prohibited.
Failing to observe this renders
any manufacturer liability or
guarantee claims void.
NOTE
Adjustment and maintenance
work may only be carried
out by authorised specialist
personnel.
Environmental
protection and
recycling
CAUTION
Copyright
Redistribution, even in part,
or use of this documentation
for purposes other than
intended without the written
authorisation of
REMKO GmbH & Co. KG
.