10
"TIMER ON" key
This key initiates the automatic switch-on time for
the unit. Each press of this key increases the delay
time by 30 minutes. When the set time on the dis-
play exceeds 10.0, each press of the button
increases the set time by 60 minutes. To deacti-
vate the delay time, set the time to 0.0.
11
"TIMER OFF" key
This key can be used to program the delayed
switch-off time. Each press of this key increases
the switch-off time by 30 minutes. When the set
time on the display exceeds 10.0, each press of
the button increases the set time by 60 minutes. To
deactivate the switch-off time, set the time to 0.0
12
3-D swing mode
Press this key to start or stop the swing mode.
With the 2-point key, you can adjust the horizontal
fin on the left side. Press this key once to change
the angle by 6 degrees. Pressing the key for 2 sec-
onds stops the swing function. When the swing
function is stopped, LC appears on the display for
three seconds.
13
"FOLLOW ME" key
This key can be used to activate/deactivate the
FOLLOW ME function. In this mode, the room tem-
perature is measured on the remote control. This
sends a signal to the indoor unit every 3 minutes. If
the remote control does not send a signal to the
indoor unit for 7 minutes, this mode is automati-
cally deactivated.
14
"LED" key
This activates/deactivates the display on the indoor
unit.
Indicators on the LCD
2
1
4
3
6
9
8
10
5
7
11
13
12
Fig. 7: Indicators on the LCD
1:
Mode display - shows the current operating
modes including Auto ( ), Cooling( ), Dehu-
midifying ( ), Heating ( ), Fan ( ) and back
to Auto ( ) mode.
2:
Signal transmission symbol. This symbol
appears when signals are being transmitted
from the remote control to the indoor unit.
3:
ON/OFF symbol. This symbol appears when
the "ON/OFF" key is pressed. Pressing this
key again causes the indicator to go out.
4:
TIMER ON symbol. This symbol appears
when TIMER ON is switched on.
5:
ECO function (not available)
6:
TIMER OFF symbol. This symbol appears
when TIMER OFF is switched on.
7:
Battery status (weak)
8:
Sleep symbol. This symbol appears when the
"Sleep" function is activated. Pressing this key
again causes the indicator to go out.
9:
Temperature/Timer symbol. Shows the tem-
perature setting (-17°C~30°C). If "FAN" mode
is selected, the temperature setting is not dis-
played. In Timer mode, the ON and OFF set-
tings appear for the TIMER.
10: FOLLOW ME symbol. This symbol appears
when the "Follow me" function is activated.
11: Ion generator display active (optional)
12: Fan speed symbol. This is where the selected
fan speeds are displayed: AUTO (no indicator)
and the three fan speed settings:
(slow),
(medium) and
(fast). The fan speed is set to "Automatic"
when either "Auto" or "Dehumidification" mode
is activated.
13: Silent mode active (optional)
REMKO SKT series
14
Содержание SKT 261
Страница 4: ...13 General view of unit and spare parts 51 14 Index 53 REMKO SKT series 4...
Страница 54: ...REMKO SKT series 54...
Страница 55: ......
