REMKO RT 080, Руководство оператора, Страница: 6 / 40

SECTION B – INSTALLATION
OUTLINE DRAWING
5
Review all SAFETY information in Section A.
Since pump installations are seldom identical, this section offers only general
recommendations and practices required to inspect, position and arrange the pump
and piping.
Most of the information pertains to a standard static lift application where the pump is
positioned above the level of liquid to be pumped.
If installed in a flooded suction application where the liquid is supplied to the pump
under pressure, some of the information such as mounting, line configuration, and
priming must be tailored to the specific application.
Since the pressure supplied to the pump is critical to performance and safety,
be sure
to limit incoming pressure to 50% of the maximum permissible operating pressure as
shown on the pump performance curve.
For further assistance, contact your Remko distributor.
Pump Dimensions
See Figure 1 below for the approximate physical dimensions of this pump.
Figure 1. Pump Model RT 080
DIMENSIONS: MILLIMETRES
Ø17.5
293.7
76.2
228.6 284.2
668.3
1
9
0
.5
70
6
8
7
.4
4
3
1
.8
393.7
431.8
101.6
Ø38.1
80MM ANSI 150
80MM ANSI 150