REMKO KFB 4, Инструкции по эксплуатации и монтажу

Страница: 8 / 20

4 Operation
It is operated by the touch fields on the lower area
of the remote control. Information and settings are
shown on the display. If no entry is made for 30
seconds, the backlight is deactivated. The back-
light is reactivated by pressing any touch field
again.
Keys on the remote control
F
8
7
6
9
4
3
1
2
5
Fig. 2: Keys on the remote control
The remote control is operated using the relevant
keys on the touchpad.
1
"ON/OFF" key
This key switches the connected indoor unit on or
off.
2
“Back arrow” key
By pressing this key, a selected function can be
deactivated.
3
“Enter” key
This key is used to activate functions and confirm
settings.
4
“Arrow up” key
This key is used to increase the desired setpoint.
The key is also used to navigate between functions
and adjust settings.
5
“Arrow down” key
This key is used to decrease the desired setpoint.
The key is also used to navigate between functions
and adjust settings.
6
“Function” key
By pressing this key it is possible to switch
between the functions. Alternatively, it is possible
to switch between the individual functions by
pressing the function key once with the arrow keys.
7
“Mode” key
With this key it is possible to select between the
Cooling, Heating, Dehumidification and Recircula-
tion operating modes.
8
“Fan” key
By pressing this key, up to seven fan speeds and
automatic fan control can be selected. The auto-
matic fan adjusts the fan speed automatically to
achieve the best compromise between perform-
ance and comfort.
9
“Swing fin” key
With this key the air outlet fins can be set to a fixed
position or oscillating.
REMKO cabled remote controls
8