6
REMKO
HPS 500, MPS 800, MPS 1000
Shutdown
Temporary shutdown
1.
Disconnect the electrical connection
at all poles.
2. Drain the storage tank in areas where
it is at risk from frost and before the
onset of winter.
3. Then drain all pipes leading to the
heating units and to the unit itself,
as well as all water carrying fittings
and pipes (also heating cycle = heat
exchanger) to the frost-proof part
of the installation provided by the
customer.
!
CAUTION
When emptying the storage tank,
hot water may escape!
!
CAUTION
When putting the storage tank
back into service, ensure that it is
filled with water and that water
which is free of bubbles is escaping
from the valves!
Permanent shutdown
Ensure that units and components are
disposed of in accordance with local
regulations, e.g. through authorised
disposal and recycling specialists or at
collection points.
REMKO GmbH & Co. KG or your
contractual partner will be pleased to
provide a list of certified firms in your
area.
Description
The buffer tanks are used to store hot
water in all types of hot water central
heating systems (combustible burners for
solid fuel, oil-fired boilers, heat pumps,
solar plants, gas/electric instantaneous
water heaters) within enclosed spaces.
The storage tank volume can be
adapted to your particular needs by
connecting several buffer tanks to form
batteries. The buffer tanks may be used
universally, either as parallel buffer
tanks (hydraulic compensators) or series
buffers.
The insulation of the HPS 500 and
MPS 800/1000 hot water tanks consists
of high-efficiency double-lining thermal
insulation.
All buffer tanks are produced from
high-quality steel in accordance with
DIN EN 10025/10111, and are provided
with rust protection on the outside.
Immersion heater elements can be
screwed into the built-in 6/4" socket in
the buffer tanks.
A D240 blank flange cover is included to
retrofit a fine-tube heat exchanger.
The buffer tanks have 9 (11 for the
MPS 800/1000) 6/4" IG connection
threads as well as inflow restrictors.
A conductive rail is installed in
the storage tank to enable probe/
thermometer immersion sleeves to be
used.
Содержание HPS 500
Страница 2: ......
