REMKO BL 263 DC, Руководство по сборке и эксплуатации

Страница: 19 / 64

SLEEP function
The sleep function saves energy while you sleep.
This function is activated by pressing the key on
the remote control. Press the key before going to
sleep. In cooling mode, the unit automatically
increases the set room temperature by 1 °C after 1
hour. After one more hour, the room temperature is
increased by an additional 1 °C. In heating mode,
the room temperature is decreased within the first
two hours of operation by 2°C. After 7 hours of unit
operation, the unit switches automatically off in
cooling and heating mode.
This function is not available in the recirculation
and dehumidification operating modes!
1
Fig. 18: "Sleep" function
Setpoint
After 7 hours
unit OFF
1 hr
1 hr
Fig. 19: Sleep function
19