4
REMKO ATK
■
The unit may be set up and
operated only in an environ-
ment not at risk of fire or explo-
sion
■
The unit may not be set up in
atmospheres containing oil,
sulphur, or salt
■
A safety zone of and 1.50 m
around the unit and non-flam-
mable objects must be
observed
■
The protective air suction grille
must always be free of dirt and
loose objects
■
Never insert foreign matters
into the unit
■
The unit may not be exposed to
direct water jets, such as
high-pressure cleaning unit,
and so on
■
All electrical cables of the unit
must be protected from dama-
ge (e.g. due to animals)
■
Safety equipment may neither
be bridged nor blocked!
■
Due to the design, a perma-
nent, fixed-location installation
is not intended for this type of
unit
Safety Notices
When using the appliance, always observe the respective local construc-
tion and fire protection ordinances as well as the regulations of the
employers‘ liability insurance associations.
The appliances were subjected to
extensive material, functional and
quality tests before delivery. Never-
theless the equipment may present
a danger if it is used by untrained
personnel, improperly or not accor-
ding to regulation!
Please observe the following
notices:
■
Before maintenance or servicing
work, the mains plug must be
removed from the socket
■
The unit may be operated only
by personnel who have been
trained in its operation
■
The unit must be set up and
operated in such a way that
people are not endangered by
exhaust fumes and radiated
heat and no fires can break out
■
The unit may be set up and
operated in rooms only if there
is a sufficient amount of air for
the combustion
■
The unit may be operated
without an exhaust duct only in
well-ventilated rooms. People
may not constantly be in the
mounting room
Corresponding prohibition
signs must be posted at the
entryways!
■
The unit may not be operated
without supervision
■
Mount the unit only on a
level, non-flammable base
Environmental
Protection and
Recycling
Disposal of packaging
When disposing of the packaging
material, think of the environment.
Our equipment is carefully packed
for transport and delivered in a
stable cardboard transport package
on a wooden pallet, if necessary.
The packaging materials are
environmentally friendly and can
be reused.
With the reuse of packaging mate-
rial, you make a valuable contribu-
tion to the reduction of waste and
the preservation of raw materials.
You should thus dispose of the
packaging material at the corre-
sponding disposal sites.
Disposal of the old device
The equipment manufacturing
process is subject to constant qua-
lity control.
Only high-quality materials that
are recyclable to a great extent are
used.
You also contribute to environ-
mental protection by guaranteeing
that your old unit is disposed of an
environmentally friendly manner.
For this reason, bring the old unit
only to an authorised recycling
company or to a corresponding
disposal site.
Содержание ATK 25
Страница 2: ......
