6
G
Any work regarding the refrigerating plant and its
electrical equipment is to be carried out exclu-
sively by especially authorized experts!
Safety Instructions
REMKO dehumidifiers will provide you with high utility
and long life thanks to our extensive material, function
and quality controls.
Dangers may arise nevertheless if the unit is used by
persons not familiar with its operation or if the unit is not
used for its intended purpose.
◊
Make sure to install and use the unit only in explo-
sion-proof rooms.
◊
Make sure not to install and use the unit in an atmos-
phere containing fuel, oil, sulphur and salt.
◊
Make sure to install the unit on a solid base and in a
vertical position.
◊
Make sure not to expose the unit to a direct water
jet.
◊
Make sure that the air can be freely sucked in and
blown off.
◊
Make sure that the suction side is always free from
dirt and loose objects.
◊
Never put objects into the unit.
◊
Do not cover the unit during operation.
◊
Make sure not to transport the unit during operation.
◊
Avoid strong vibrations on the unit as soon as there
is condensate in the condensate tank.
◊
Make sure to protect all electric cables outside the
unit from damage (e.g. by animals).
◊
Before installing connection cable extensions make
sure that they are suitable for the connected power,
cable length and the intended purpose.
◊
Make sure to empty the condensate tank before in-
stalling the unit in another place.
◊
Make sure to transport the unit only in a vertical posi-
tion.
◊
Damage on the compressor will be avoid by a wait-
ing period of at least 1 minutes before starting the
unit.
◊
Uses/operations other than that indicated in these
operating instructions are not allowed!
In the case of non-observation, any of our responsi-
bilities and guarantees will become void.
◊
The unit is to be used with the environmentally
friendly, ozone-neutral refrigerant R407C.
◊
The refrigerant/oil mixture in the unit is to be dis-
posed of correctly and in accordance with the legal
or local prescriptions.
Important Tip Regarding Recycling!
Unit Description
These unit have been designed for automatic, universal
and problem-free air dehumidification. Thanks to their
compact dimensions they can be easily transported and
installed.
The unit work according to the condensation principle
and are equipped with a hermetically sealed refrigerat-
ing plant, a silent nearly maintenance-free ventilator as
well as with a connection cable with plug.
For an operation-control exists a green control-lamp
“operation” on the control-panel. The correct time of op-
eration will record by a hour counter.
The fully automatic electronic control, the condensate
container with integrated overflow safety device, as well
as the connecting branch for direct condensation drain-
ing ensure trouble-free continuous operation.
The unit correspond to the fundamental safety and
health requirements of the relevant EC regulations, they
operate safely and are easy to handle.
Function
When the unit is switched on the electronic control and
monitoring starts.
The green control lamp is lit up.
The compressor and fan are switched on time-delayed.
The
fan
sucks in the ambient air via the air filter, the
evaporator and the condenser placed behind the latter.
Heat is extracted from the ambient air at the cold
evaporator.
It cools down below the dew point, and the
water vapour contained in the air is deposited as con-
densate or hair frost on the evaporator lamellas.
When necessary the evaporator is defrosted with hot
gas with temperature control.
The dehumidified cooled down air is reheated at the
condenser
(heat exchanger), and then it is blown out
when it has reached a temperature of approx. 3 - 5 de-
grees above the ambient temperature.
The treated dry air is mixed with the ambient air.
Thanks to the continuous circulation of the ambient air
through the unit, the relative air humidity in the place of
installation is continuously reduced until it has reached
the desired value.
water container
condensate trap
ambient air
fan
compressor
dehumidified
ambient air
condenser
evaporator
fig. AMT 60
Schematic display of function