Remington Smooth & Silky WDF4819AU, Инструкция по использованию и уходу

Страница: 4 / 12

4
INSERTING BATTERIES
Your shaver requires 2 ‘AAA’ alkaline batteries (first set included). We
recommend that you use Varta
®
alkaline batteries for optimal performance.
1. Make sure the product is turned off.
2. Rotate the battery compartment cap approximately 1/4 turn counter-
clockwise and pull.
3. Insert 2 “AAA” alkaline batteries, so that the (+) and (-) symbols on the
battery align with the corresponding mark in the battery compartment.
4. Place cap back on unit using the alignment marks and rotate clockwise
until the cap snaps into place.
NOTE: Your shaver will not work if the batteries are inserted incorrectly.
NOTE: Remove batteries if the unit is not in use for long periods.
HOW TO USE
Your shaver is suitable for legs, underarms and the bikini area. It can be used
wet or dry.
FOR EVERYDAY USE
1. Remove the bikini comb.
2. Turn the shaver on.
3. Hold the shaver at a right angle to your skin and move the shaver against
the direction of the hair growth.
4. After shaving, turn shaver off.
NOTE:
• Rinse only with cool or warm water, not hot water. Do not rinse with water
hotter than 70°C.
• Before dry shaving, make sure that the area is clean, dry and free from
creams or oils.
FOR LONGER HAIRS
If you have not shaved for a while, use the flexible trimmer before shaving. This
will help you achieve a more effective shaving result.
1. Turn on shaver.
2. Hold the shaver with the trimmer facing your leg and slightly tilted towards
you (approximately at a 45º angle).
3. Move the trimmer slowly against the direction of the hair growth.
4. After shaving, turn shaver off.