ABOUT YOUR BEARD TRIMMER
MB4850AU SPECIFICATIONS
Power System
Cord/Cordless (Rechargeable)
Full Charge Time
4 Hours
Runtime
120 Minutes
Indicators
LED Charging/Low/Full
Voltage Type
(adaptor voltage type)
Worldwide 100-240V
CHARGING
• Before using your trimmer for the first time, charge it for 4 hours. Note during this
charge ignore the electronic indicators as they are in “start-up cycle”.
• Plug the adaptor into your trimmer and then plug the charging adaptor unit into
a 100-240 volt domestic power outlet. Check to ensure that the trimmer On/Off
switch is OFF. The Charging Indicator Light will pulse on and off to indicate that it is
charging. The light will stay solid when charging is complete.
When the batteries are low and require recharging, the appliance indicator light will
blink red after use.
• The batteries cannot be overcharged, but it is recommend that charging be
discontinued and the trimmer stored away if it will not be used for an extended
period of time (2-3 months).
• The beard trimmer will be fully charged in 4 hours.
• To preserve the life of the batteries, it is recommended that this appliance should
not be left plugged in to a mains power outlet for extended periods of time.
• Use the trimmer only with the charging adaptor supplied.
CLEANING AND MAINTENANCE
To ensure long lasting performance of the trimmer, clean the blades and unit regularly.
• Ensure the appliance is switched off and unplugged from the mains.
• Always store the attachment guide comb on the trimmer blade.
• Do not use harsh or corrosive cleaners on the unit or blades.
• This product is showerproof and fully washable, after rinsing under a tap ensure
the product is dry. DO NOT rinse while the product is connected to the mains power
outlet under any circumstances.
• Wash the heads under a running tap to remove any hair clippings.
5
