41
PROBLEM
POSSIBLE
CAUSE
WHAT YOU SHOULD DO
Dirt or debris
is stuck to the
window.
The i-Light® Pro
system needs to be
cleaned.
See page 32 for instructions on how
to clean your IPL system. If you still
can’t get it clean, contact Customer
Service (see page 44) for help.
The Cool Down
Mode Indicator
icon is flashing
yellow and the
system is
beeping.
The hand piece needs
some time to cool down.
Under normal operating
conditions this is an
uncommon occurrence.
However this situation
can arise if either the
hand piece or base unit
become too hot.
Wait for a few minutes for the system
to cool down. There is no need to
shut the unit down, as the Cool Down
Mode Indicator light will turn off when
the i-Light® Pro IPL system is ready
to use again.
The room is too warm. Use the system in a cooler environ-
ment, where the temperature is less
than 80° F or 27° C.
Troubleshooting
