25
Notes:
•
Some areas are darker than others.
You must use the skin sensor on each
different area you intend to treat.
• If you feel the SKIN TONE SENSOR
has not made a proper reading, you
may try again after 5 seconds. If you
believe your skin is suitable based on
the Skin Tone chart on page 5 but the
SKIN TONE SENSOR will not enable the
system, contact Customer Service (see
page 44).
• If you have tanned skin in the intended
treatment area, DO NOT use the i-Light
Pro system in those areas as your skin
may be too dark for treatment. You
should wait until your tan has complete-
ly faded from any intended treatment
area before using the i-Light Pro system.
• For safety reasons, the system will
re-lock after 5 minutes of inactivity.
If you take a break in the middle of a
treatment, or if you turn off the system,
you will need to use the SKIN TONE
SENSOR to unlock the IPL again.
Setting the Energy Level
Energy Level Selection Display lights
determine the intensity of the light flash
delivered to your skin, from the lowest
level (*) to the highest level (*****). Higher
levels improve hair removal results, but
may be less comfortable. To get the best
results, you should use the highest setting
that’s comfortable.
There are 5 energy level settings on
the i-Light® Pro system. Whenever the
i-Light® Pro IPL system is turned on, the
device is automatically set to the lowest
energy level and only one ENERGY LEVEL
INDICATOR SELECTION light will be on
(ENERGY LEVEL 1 in the table on page
26). To modify the energy level, press the
ENERGY LEVEL SELECTION BUTTON to
increase the energy level. Once the
energy level has reached level 5,
pressing the ENERGY LEVEL SELECTION
BUTTON will return the system to energy
level 1. The number of ENERGY LEVEL
SELECTION DISPLAY lights will coincide
with the change in energy level.
Using the i-Light® Pro IPL System Every Time
