background image

35

Flash Bulb Usage

0 – 90%

90 – 100%

100%

Flashes

0 – 1,350 flashes

1,351 – 1,500 

flashes

1,500 flashes

Cartridge Status 

Indicator Display

Cartridge Status 

Indicator 

Display

 

Flash & Audible Tone

Cartridge Status 

Indicator LED will 

be lit solid GREEN, 

with no audible 

tone.

Cartridge Status 

Indicator LED will 

be lit solid YELLOW, 

with no  

audible tone.

Cartridge Status 

Indicator LED will 

flash YELLOW, with 

an audible beep 

every 0.5 seconds 

until cartridge is 

replaced.

4.

  Grasp the DISPOSABLE CARTRIDGE 

and gently pull away from the HAND 

PIECE. Discard the used cartridge in 

accordance with local regulations.

 WARNING: Ensure cartridge has cooled 

for 5 minutes before handling. Exercise 

care when replacing cartridge.

5. 

 Push the new DISPOSABLE CARTRIDGE  

gently into place, taking care not to touch  

the LAMP TUBES or damage the pins  

on the cartridge. 

Note:

 the DISPOSABLE  

CARTRIDGE must be oriented so that 

the side with 4-pins is on the left, and the  

side with 1-pin is on the right. 

6.

  Gently push the NOSE CONE back into 

the HAND PIECE making sure both 

sides click into place. 

Note:

 the longer 

tab (with gold circuits) must be on top 

to properly fit.

3.

  Grasp the NOSE CONE with one hand 

while pressing both NOSE CONE 

RELEASE BUTTONS with the other 

hand and pull gently. Set the NOSE 

CONE in a safe location taking care not 

to damage the FLASH WINDOW and 

other components.

1. 

2. 

Содержание iLIGHT PRO IPL6000COS













































Отзывы:

Похожие инструкции для iLIGHT PRO IPL6000COS