Remington i-LIGHT PRO, Инструкция по использованию и уходу

Страница: 12 / 55

22 23
2b. Always place the SKIN TONE SENSOR
window directly on the area of skin
you plan to treat. The reading will take
place automatically.
Note: You must use the SKIN TONE
SENSOR to test color on each body part
you plan to treat.
2a. Turn the POWER SWITCH on. The
SKIN TONE SENSOR will flash
YELLOW. You will hear a series of
audible “BEEPS” every 5 seconds to
remind you to take the test. For safety
reasons, after 30 seconds of inactivity,
the audible “BEEPS” will increase in
frequency until the test is taken or the
machine is turned off.
SKIN TONE SENSOR LED
will be blinking
STEP 2: TURN ON AND UNLOCK
the Remington iLIGHT Hair
Removal System.
Flip the POWER SWITCH on
near the
power inlet.
Each time you turn the Remington
iLIGHT device on, you will be prompted
to test your skin tone with the SKIN
TONE SENSOR. The device will play
a melody to remind you to test.
See Figure 3.
Note:
Using the Remington iLIGHT
device on darker skin tones can result
in damage to the skin (such as burns,
blisters or skin discoloration). To help
protect against such damage, the device
requires that you test your skin tone
before every use. Since some skin areas
are darker than others, test each differ-
ent area you want to treat.
DO NOT use the Remington iLIGHT
device on tanned skin. Even if your
natural skin tone is light, tanning makes
it darker—potentially too dark for treat-
ment. With tanned skin, wait until the tan
has completely faded before using the
device on that area.
Always use the SKIN TONE SENSOR to
determine if your skin is too dark to treat
with the Remington iLIGHT device by
placing the SKIN TONE SENSOR on the
area to be treated. Make sure your skin
in this area is clean and dry, and shave it
if necessary to be sure it is free of hair.
Figure 3
Using the Remington
®
iLIGHT
®
Hair Removal System for Treatment